Gambro AK 96 Operator'S Manual Download Page 486

Page: 486 / 509

TMP LIMITS TOO WIDE
Press SELECT key to confirm

Appears:

The TMP alarm window

is wider than the preset value.

Machine actions:

None.

Measures:

Press the

Select key

to centralize the alarm limits around

the current value. This text will appear at any time

during treatment when the blood pump has been started

or stopped, the ultra

ltration has been activated or

deactivated, or when changes of treatment time and UF

volume have been made.

Mute time:

2 min.

Buzzer sound:

Soft buzzer

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Attention Alarms

14:115

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 486 / 509

Search results

Summary of Contents for AK 96

Reviews: