Gambro AK 96, Operator'S Manual, Page: 259 / 509

Major Changes
between Program Version 2.xx and 3.xx
Complete Manual
The paper version of the Operator’s manual for the AK 96 dialysis
machine has been divided up into three parts according to their contents
and placed in a box. The fi rst part is in A4 format, the second and
third in A5. The parts should be considered as one document in spite
of the fact that they are printed in three separate parts, meaning that
the ordering procedure and so forth of the manual will be the same as
before. Due to the partition the chapter numbers have been changed.
For instructions on how the manual is intended to be used, see "How
To Use this Manual”,page 1:2 in part 1.
A preface has been included where Intellectual Property Rights can
be found.
Chapter 2, part 1
The dialysis fl uid fl ow rate is a preset parameter value which now
cannot be adjusted by the operator during priming, yet, it is still
possible to adjust it during treatment. See “Fluid Path button”, page
3:15 in part 1.
Chapter 4, part 1
A heparin solution bolus volume can now be administrated using the
heparin pump (previously called the syringe pump). For information
of heparin pump setting possibilities, see in “Blood Part Component
Details”, page 2:5 point 8, in part 1.
It is now possible to extend the priming procedure (recirculation
priming procedure) if requested. Comprehensive priming information
can be read in “Priming”, page 4:38 in part 1. Handling instructions on
the different priming procedures are included on the following pages.
It is now possible to choose to con fi rm treatment end in two ways; by
pressing either the Select key or the Time button . See “Discontinuing”,
page 4:59 in part 1 for information.
Chapter 13, Alarm Handbook
A new alarm has been implemented;
10:2 AK 96 ® Operator's Manual - Major Changes
HCEN12239 Revision 12.2010
Program version 3.xx