Gambro AK 96 Operator'S Manual Download Page 420

Page: 420 / 509

DISINFECTION REQUIRED
days since last disinfection###

Appears:

When a heat disinfection program is needed.

Machine actions:

None.

Measures:

If possible, run a heat disinfection program. If not, the

attention alarm can be cleared by pressing the

Select key

If the machine is not disinfected after treatment, the

attention alarm will reappear during the next treatment.

The period of time between the last performed

disinfection and the appearance of the attention alarm

can be preset.

Mute time:

Permanently muted buzzer.

Buzzer sound:

Supersoft buzzer

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Attention Alarms

14:49

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 420 / 509

Search results

Summary of Contents for AK 96

Reviews: