Gambro AK 96 Operator'S Manual Download Page 322

Page: 322 / 509

Alarms - General

Alarm Indication

When an alarm is generated, the machine indicates the

alarm as follows:

the

Alarm button

ashing

the

Mute button

ashing

the buzzer sounds continuously

the button (not valid for Blood

Leak alarm and Technical

Alarm) of which the treatment

parameter is connected to, and

the alarm applies for, lights up.

See the description for each

alarm in the "Alarm List" page

13:9.

General Alarm Handling

Press the

ashing

Alarm button

. The button lights

up and the alarm text (which gives information on

what has triggered the alarm) is displayed in the alarm

list of the Information Display. At the same time as

the

Alarm button

is being pressed, the buzzer will be

simultaneously muted for 2 min.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Alarms

13:5

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 322 / 509

Search results

Summary of Contents for AK 96

Reviews: