Gambro AK 96 Operator'S Manual Download Page 406

Page: 406 / 509

DIALYSIS FLUID FLOW TOO LOW

Appears:

Appears during treatment when the dialysis

uid

rate is too low. The dialysis

uid

ow rate has been set

below the low alarm limit

or there is an obstruction in

the dialysis

uid

ow path.

Machine actions:

None.

Measures:

If possible, increase the dialysis

uid

ow rate.

If this is not possible, consult an authorized technician.

It is possible to mute the buzzer by pressing the

Mute button

, but if the attention alarm is left without

taking measures, it will reappear the next treatment.

Mute time:

Permanently muted buzzer.

Buzzer sound:

Soft buzzer

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Attention Alarms

14:35

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 406 / 509

Search results

Summary of Contents for AK 96

Reviews: