Gambro AK 96, Operator'S Manual, Page: 48 / 509

6. Yellow Disinfectant Connector
This connector must be placed in the parking port (point 4
in this list) at all times except when a chemical disinfection
program is performed.
If the disinfectant used for chemical disinfection program is
permanently connected to the inlet line at the back of the
machine this connector is to be placed in the disinfection
port (point 5 in this list) during the chemical disinfection
program. If not, this connector is to be connected to the
separately attached pick-up tube for intake of disinfectants
and inserted into the disinfectant container. For further
information concerning how to run a chemical disinfection
program, see "Chemical Disinfection Program - Performing"
on page 8:27 in part 1.
To correctly attach the connector to the port; insert the
connector into the port and push it into place until it clicks
in .
To remove the connector from the port; compress the
connector as shown in the corresponding fi gure, before
pulling the connector out .
2:22 AK 96 ® Operator's Manual - Machine Description
HCEN12239 Revision 12.2010
Program version 3.xx