Gambro AK 96 Operator'S Manual Download Page 373

Page: 373 / 509

Attention Alarms - General

Attention Alarm Indication

When an attention alarm is generated, the machine

indicates the attention alarm as follows:

The

Attention button

ashes.

The

Mute button

ashes.

For most attention alarms the

buzzer sounds.

There are three kinds of buzzer

sounds:

•

Soft - - - - - - - - - -

•

Supersoft - -(10 sec) - -(10

sec)

•

Continuous --------------

General Attention Alarm Handling

Press the

ashing

Attention button

. The button lights up

and the attention alarm text (which gives information on

what has triggered the attention alarm) is displayed in the

attention list on the Information Display.

14:2

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 373 / 509

Search results

Summary of Contents for AK 96

Reviews: