Gambro AK 96 Operator'S Manual Download Page 340

Page: 340 / 509

Measures:

Press the

ashing

Alarm button

and the alarm text

will be shown on the Information Display.

Check cause for the low blood

ow rate e.g. problems

with the patient's blood access that has recently been

taken care of, previously made air detector alarm

override, previous technical alarm etc. If possible,

increase the blood

ow rate to the proper value and

the alarm will automatically disappear when the

blood

ow rate is set above the alarm limit value.

If necessary, adjust the alarm limit value by pressing

the

Select key

to enter the

BLOOD FLOW MENU

Adjust the alarm limit;

SET LOW

, as necessary.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Alarms

13:23

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 340 / 509

Search results

Summary of Contents for AK 96

Reviews: