Gambro AK 96 Operator'S Manual Download Page 431

Page: 431 / 509

FLUID TUBES IN SAFETY BYPASS
Connect fluid tubes to dialyzer

Appears:

This attention alarm can appear for three different

reasons:

1. If the dialysis

uid tubes are still connected to the

safety couplings and blood is detected by the priming

detector.

2. If the dialysis

uid tubes are reconnected to the safety

couplings during treatment. Buzzer is activated 5

min. after attention alarm is generated.

3. During assisted priming if the dialysis

uid tubes are

still connected to the safety couplings and they are

expected to be connected to the dialyzer.

Machine actions:

None

Measures:

Move the dialysis

uid tubes from the safety couplings

to the dialyzer.

14:60

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 431 / 509

Search results

Summary of Contents for AK 96

Reviews: