Gambro AK 96, Operator'S Manual, Page: 101 / 509

dialysis fl uid tubes must remain connected to the safety couplings until
the bypass path of the Flow Diagram lights up green.
When "F.Ch” disappears from the Time Display the dialysis fl uid
tubes can be attached to the dialyzer.
The bypass path of the Flow Diagram also lights up. Before the correct
conductivity level has been reached the bypass path will be orange.
When the fl uid preparation is fi nished the bypass path turns green .
At the same time the Fluid bypass button will be fl ashing. When
pressed (and green path), the button lights up and the dialysis fl uid
will start to fl ow.
If the dialysis fl uid tubes are connected to the safety couplings, the
fl uid will circulate within the machine. If they are connected to the
dialyzer, the fl uid will enter the dialyzer at that time. See "Dialysis
Fluid Tubes - Attach" starting on page 4:35 in part 1 for instructions on
how to properly attach the dialysis fl uid tubes to the dialyzer.
If desired, the concentrates may be connected, and the blood lines may
be attached, before the machine has been switched on. If so, do not
connect the pressure transducers of the blood lines to the machine until
the machine has been switched on and the Priming button lights up.
Priming may be started (the blood lines and the blood compartment of
the dialyzer) during function check (after complete blood part checks).
4:4 AK 96 ® Operator's Manual - Double Needle Treatment
HCEN12239 Revision 12.2010
Program version 3.xx