Gambro AK 96 Operator'S Manual Download Page 361

Page: 361 / 509

Measures:

Press the

ashing

Alarm button

and the alarm text

will be shown on the Information Display. Then press

the

Select key

to open the temperature menu.

It is also possible to press the lit

Fluid Path button

select

TEMP

and go into the temperature menu, using

the

Keypad

The alarm limit setting of which the alarm applies

for will be open.

Check cause (inlet water supply, power supply) and

do necessary actions in accordance with this. Wait

for correct dialysis

uid temperature to be resumed.

If necessary, call for an authorized technician or

discontinue treatment.

13:44

AK 96

Operator's Manual - Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 361 / 509

Search results

Summary of Contents for AK 96

Reviews: