Gambro AK 96 Operator'S Manual Download Page 68

Page: 68 / 509

The Bypass Path

The bypass path lights green when the dialysis

uid preparation

is ready (the conductivity level of the dialysis

uid is correct) for

treatment. When the dialysis

uid is not correct the path is orange.

The machine will automatically bypass the dialyzer during certain

alarm conditions and during self-calibration.

The Dialyzer Path

The dialyzer path lights green when dialysis

uid is passing through

the dialyzer.

The Ultra

ltration Path

The ultra

ltration path lights yellow during isolated ultra

ltration and

uid bypass.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Operating the Machine

3:7

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 68 / 509

Search results

Summary of Contents for AK 96

Reviews: