Gambro AK 96 Operator'S Manual Download Page 102

Page: 102 / 509

It may also be performed during disinfection program. Bear in mind

that the

Priming button

must be lit in both cases.

The set treatment time appears on the Time Display

during priming

when 70% of the priming volume has been achieved, the venous drip

chamber has been

lled, and the bypass path of the Flow Diagram

lights up green.

CAUTION

After chemical disinfection procedure a test for residues must have

been performed prior to connecting to a patient.

CAUTION

Note

•

After the machine has passed the function check and the

bypass path on the Flow Diagram lights up green, it is

possible to activate concentrate stand-by mode in order to save

concentrates before patient connection. See information in

"Concentrate Stand-by Mode" on page 3:30 in part 1.

Note

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Double Needle Treatment

4:5

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 102 / 509

Search results

Summary of Contents for AK 96

Reviews: