Gambro AK 96 Operator'S Manual Download Page 41

Page: 41 / 509

18.

BPM Cuff Holder

(option)

The holder has tape adhesive on both sides on the back which

makes it possible to place it anywhere appropriate on the

machine considered convenient.

The holder is in the main intended for the blood pressure

cuff and line, but can also be used to hold paper documents.

19.

Infusion Pole

The standard infusion pole is intended to be used for hanging

uid bags. The maximum permitted load is 2 kg.

The height of the infusion pole can be adjusted by

rst

loosening the infusion pole locking screw (on the machine)

whilst holding the pole, and then moving the pole upwards

or downwards as shown in the corresponding

gure, before

locking it into place.

2:14

AK 96

Operator's Manual - Machine Description

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 41 / 509

Search results

Summary of Contents for AK 96

Reviews: