Gambro AK 96 Operator'S Manual Download Page 113

Page: 113 / 509

Arterial Blood Line - Attach

WARNING

Do not use the pediatric blood lines; A-5.128-B4 or V-5.127-X. The

blood line clamps of the AK 96 dialysis machine cannot clamp these

thin blood lines.

WARNING

Follow the Instructions For Use for the particular arterial blood line

being used. In addition, especially observe the following items.

The items are pointed out in "set-up" order, starting with the blood

pump.

A list of details on how to correctly attach the corresponding arterial

blood line parts, follows on the pages directly after this.

4:16

AK 96

Operator's Manual - Double Needle Treatment

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 113 / 509

Search results

Summary of Contents for AK 96

Reviews: