Gambro AK 96, Operator'S Manual, Page: 310 / 509

8. When
Kt/V TARGET
has been
selected set a desired dialysis
dose target value (Kt/V)
which
is to be achieved at treatment
end, using the Display Up key .
The target value for Kt/V can be
set between
OFF
and 2.0.
When the Kt/V target value has
been set, the machine calculates
the time needed to reach the
target. This time to target (
TTT
)
will be displayed in the viewing
menu as soon as the fi rst Diascan
measurement check has been
performed.
The fi rst Kt/V and clearance measurement check in
the sequence will be performed on an appropriate
occasion chosen by the machine. The occasion chosen is
dependent on when the self-calibrations of the machine
are to be performed.
DIASCAN
will be shown at the
activity fi eld of the Treatment Overview Menu when the
function has been activated.
During the period of time when the measurement check
is being performed,
DIASCAN
, shown at the activity fi eld
of the Treatment Overview Menu, will be fl ashing.
When a measurement check has been performed, an
attention alarm text without a buzzer will appear on the
Information Display . Press the
Select key to enter
the
LOG
menu. The measurement result values are also
displayed in the Diascan viewing menu.
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96 ® Operator's Manual - Diascan 12:29