Gambro AK 96 Operator'S Manual Download Page 179

Page: 179 / 509

Activated isolated UF is displayed at the activity

eld of the

Treatment Overview Menu on the Information display. During

the phase, the accumulated values for ultra

ltration

ACC UF

and

time

ACC TIME

will be displayed on the isolated UF menu.

Press the

Fluid Path button

, select

and then

ISOL UF

view the menu.

If necessary, isolated UF can be deactivated at any time during the

phase, by pressing the

Select Key

for 3 seconds when the isolated UF

menu is displayed.

When the time for the isolated UF phase equals 0:00, the attention

alarm

TREATMENT TIME EXPIRED

appears and the treatment is to

be discontinued as usual procedure.

6:6

AK 96

Operator's Manual - Isolated UF

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 179 / 509

Search results

Summary of Contents for AK 96

Reviews: