Gambro AK 96 Operator'S Manual Download Page 412

Page: 412 / 509

Diascan NOT POSSIBLE during
UF STEP/INTERVAL profiling

Appears:

During an attempt to activate the Diascan function when

UF pro

ling in steps or intervals is active, or when an

attempt to activate UF pro

ling in steps or intervals

is made and Diascan measuring has previously been

activated.

Machine actions:

The Diascan function is not available in combination with

UF pro

ling in steps or intervals. The Diascan function

will automatically be de-activated.

Measures:

Note that the Diascan function is no longer active.

The attention alarm automatically disappears after

30 seconds.

Mute time:

Permanently muted buzzer.

Buzzer sound:

Soft buzzer.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Attention Alarms

14:41

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 412 / 509

Search results

Summary of Contents for AK 96

Reviews: