Gambro AK 96, Operator'S Manual, Page: 219 / 509

3. Select
CHEMICAL
.
4. Select the desired chemical disinfectant program .
5. Start the program by pressing the Select key for 3seconds,
Rinse/Disinfection button lights up.
DISINFECTION IN PROGRESS:
will be displayed and will
remain throughout the program.
The Rinse/Disinfection button will continue to be lit throughout
the program, indicating that the program is ongoing.
6. Connect the yellow disinfectant connector (see point 6 in
"Fluid Part Component Details", starting on page 2:19) to
the pick-up tube and place it in the disinfectant container,
alternatively move the disinfectant connector from the
parking port to the disinfectant port.
7. If the disinfectant connector is still connected to the parking
port when the fi lling phase of the program starts, the
following attention alarm will be generated:
Note especially that the disinfectant connector must remain in the
disinfectant container/disinfectant port and not be moved to the
parking port before the program is complete. This is due that the
chemical disinfectant is pushed back to the disinfectant container
to empty the connector/intake tube at the end of the program.
8. When the program is complete the Priming button starts to
fl ash and
DISINFECTION COMPLETED:
is displayed.
9. Switch the machine off by pressing the On/Off button for
3 seconds.
8:28 AK 96 ® Operator's Manual - Hygiene and Maintenance
HCEN12239 Revision 12.2010
Program version 3.xx