Gambro AK 96, Operator'S Manual, Page: 276 / 509

5.c. Set the proper alarm limits
suitable for the patient
using the Keypad . For
further information, see
"Blood Pressure Alarms",
starting on page 13:26 in
part 1.
Step back to the
AUTO BPM MENU
using
the Back key .
The fi rst measurement check in the sequence will be
performed when the time for the fi rst interval has ended,
e.g. if the interval is set to 20 minutes the fi rst check
will be 20 minutes after activation. The current pressure
in the blood pressure measurement cuff is displayed in
P CUFF
on the
BPM MENU
.
If the measuring process needs to be interrupted, when
the
BPM MENU
is open, press the Select key to stop the
procedure.
AUTO BPM
will be shown at the activity fi eld of the
Treatment Overview Menu when automatic BPM
measuring has been activated. During the ongoing blood
pressure measurement check, this will be replaced by a
fl ashing
BPM
label.
Note especially that it is possible to start a single
measurement check at any time between the automatic
measurement checks if necessary. When the Treatment
Overview Menu is displayed; press the BPM button and
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96 ® Operator's Manual - BPM 11:11