Gambro AK 96 Operator'S Manual Download Page 184

Page: 184 / 509

If UF volume or treatment time is changed, after UF pro

ling has

been activated, the pro

ling graph will automatically change as well.

The UF rate change will if possible be kept and the graph will shift

in parallel to the original graph.

Examples of UF rate linear graphs where time or UF volume has been

changed are shown in the pictures below (changed graphs in gray,

original graph in black). Note that if time is changed and the stop value

of the new graph reaches the minimum UF rate, the slope of the graph

will also change.

Figure 7:5

Change of UF rate linear graph when UF volume has

been changed

Figure 7:6

Change of UF rate linear graph when time has been

changed

Note

•

For any UF rate graph, always check the UF pro

ling settings

if UF volume or treatment time is changed after UF pro

ling

activation.

Note

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Proﬁling

7:5

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 184 / 509

Search results

Summary of Contents for AK 96

Reviews: