Gambro AK 96 Operator'S Manual Download Page 24

Page: 24 / 509

List of Concentrates, Accessories and

Disposables

This manual contains a number of references to concentrates,

accessories and disposables for use with the AK 96 dialysis machine.

For ease of reference, set out below is a comprehensive listing of such

concentrates, accessories and disposables as follows.

CAUTION

The AK 96 dialysis machine has been tested and validated for

use with the concentrates, accessories and disposables speciﬁed

as follows.

Gambro does not accept any responsibility or liability for use of

concentrates, accessories or disposables other than those speciﬁed

as follows. Depending on the circumstances, use of concentrates,

accessories or disposables other than those speciﬁed may also

reduce Gambro’s warranties for the AK 96 dialysis machine.

Observe the manufacturer's instructions for use regarding single

use of blood lines and dialyzers.

CAUTION

Note

•

The user should make sure to have a current listing of

concentrates, accessories and disposables available.

•

The user should follow the facility procedures for proper

disposal of used blood lines, dialyzers and other disposables

per local regulations.

Note

1:18

AK 96

Operator's Manual - Before you get started

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 24 / 509

Search results

Summary of Contents for AK 96

Reviews: