Gambro AK 96 Operator'S Manual Download Page 271

Page: 271 / 509

BPM Log List

To read the BPM measuring results,

rst open the BPM

menu using the

BPM button

. Then select

LOG

using the

Keypad

and a list of measurement results will be shown

on the Information Display.

The

*** BPM LOG LIST ***

starts with the latest

measurement at the top and has room for 20 measurement

results. If there is need for more than 20 measurements

during a treatment, the second result will be deleted,

then the third and so on. The

rst result will be saved

regardless of how many measurements are made.

The values are shown as below:

TIME

shows current time for when the blood pressure

measurement check was completed.

SYS

DIA

shows systolic/diastolic blood pressure.

MEAN

shows mean blood pressure.

The value below

PULSE

shows pulse rate.

11:6

AK 96

Operator's Manual - BPM

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 271 / 509

Search results

Summary of Contents for AK 96

Reviews: