Gambro AK 96, Operator'S Manual, Page: 238 / 509

Dialysis fluid preparation
Pressure regulators
After pressure regulator
PR1 and the heat
exchangers
80 kPa (0.8 ±0.1 bar)
After pressure regulator
PR2
130 ±10 mmHg
Temperature
Temperature
Adjustable 33 to 40 °C.
Accuracy is valid only if dialysis fl uid
temperature is greater or equal to ambient
temperature.
Alarm limits Adjustable 33 to 40 °C
Accuracy +0.5/-1.5 °C (+1.0/-2.5 °C with UFD) at
the dialysis fl uid outlet from the machine.
Heater capacity 1300 W (+10 % / -5 %) at 115 V
3 X 580 W (+10 % / -5 %) at 230 V
Overheat protection Reg-temp 80 °C or CondA-temp 70 °C in
treatment, software
Reg-temp 99 °C in disinfection, software
The heater can only be on if there is a
fl ow through the heater. The fl ow is
detected by a fl ow switch.
Flow rate
Dialysis Fluid Flow Rate 300 to 700 ml/min in steps of 20 ml/min
Accuracy ±10 % or 50 ml/min whichever is largest
Degassing
By use of negative pressure, -610 mmHg.
Adjustable degassing pressure between -300 and -700 mmHg
(-650 mmHg with 700 ml/min fl ow rate).
Accuracy ±40 mmHg
Dialysis fl uid pressure
Dialysis fl uid pressure -400 to +300 mmHg
Accuracy ±10 mmHg or ±5 %
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96 ® Operator's Manual - Technical Data 9:5