Gambro AK 96 Operator'S Manual Download Page 409

Page: 409 / 509

Diascan FAILURE
Turn OFF Diascan

Appears:

Appears when too many Diascan steps have been done

during that particular treatment.

Machine actions:

None.

Measures:

Performing further Diascan steps may lead to an

imbalance in the sodium level of the patient. The

Diascan function is not permitted to perform any more

measurement checks. Turn Diascan function off. Contact

an authorized technician.

If this attention alarm appears frequently, discuss preset

limits with an authorized technician.

Mute time:

Permanently muted buzzer.

Buzzer sound:

Soft buzzer

14:38

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 409 / 509

Search results

Summary of Contents for AK 96

Reviews: