Gambro AK 96, Operator'S Manual, Page: 211 / 509

Automatic start of the Low Flow Heat phase
1. Press the Rinse/Disinfection button brie fl y.
2. The
RINSE/DISINFECTION MENU
will be displayed on
the Information Display.
3. Select
HEAT
.
4. Check that
HEAT
is displayed as selected program. If
HEAT
is displayed, continue to point 4. If not, do point 4.a
and 4.b before continuing to point 5.
4.a. Select
CHANGE
.
4.b. Select
HEAT
.
5. Start the program by pressing the Select key for 3 seconds
until the Rinse/Disinfection button lights up.
6. Respond to the text shown on the Information Display on
whether to include the WRO or not. Use the alternative to
include the WRO.
7. The process will continue automatically from here. When
the heat disinfection of the AK 96 dialysis machine and the
low fl ow heat are fi nished the Priming button will start to
fl ash (not if an automatic switch off has been done). The
WRO will perform a heat disinfection of its fl uid path after
the low fl ow heat.
Note that if a new function check is started during the WRO heat
process an attention is generated during the function check due to
8:20 AK 96 ® Operator's Manual - Hygiene and Maintenance
HCEN12239 Revision 12.2010
Program version 3.xx