Gambro AK 96 Operator'S Manual Download Page 393

Page: 393 / 509

BLOOD PUMP OVERLOAD IN FCH
Check blood pump, Press SELECT

Appears:

When it is hardly possible for the blood pump to run.

Machine actions:

The blood pump stops.

Measures:

Check that the blood pump segment is correctly

positioned, see Arterial Blood Line - Attach on page 4:16

in part 1 for instructions. When properly positioned,

press the

Select key

If the attention alarm appears again, call an authorized

technician.

Mute time:

Permanently muted buzzer.

Buzzer sound:

Soft buzzer

14:22

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 393 / 509

Search results

Summary of Contents for AK 96

Reviews: