Gambro AK 96 Operator'S Manual Download Page 421

Page: 421 / 509

FCH IS WAITING
Attach conc connectors to ports

Appears:

During function check if a chemical disinfection program

has previously been performed and the concentrate

connectors (or disinfectant connector) are not properly

connected to the machine.

Machine actions:

Function check is interrupted.

Measures:

Check that the concentrate connectors are properly

connected to the stand-by ports. Check that the

disinfectant connector is properly connected to the

parking port. It is not possible to connect the concentrates

yet.

Mute time:

2 min.

Buzzer sound:

Soft buzzer

14:50

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Attention alarms in alphabetical order

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 421 / 509

Search results

Summary of Contents for AK 96

Reviews: