Gambro AK 96, Operator'S Manual, Page: 14 / 509

Symbols
Symbols within this Manual
When this symbol appears in the manual text, it indicates that it is
possible to preset the value of a parameter. The preset can be done to
adapt the settings of the machine to correspond with the routines of the
user/clinic. It has to be done by an authorized technician.
All values mentioned in this manual are default values set in the
machine when it was manufactured. It is important to check with the
authorized technician if values have been changed, and if so, which
ones.
For instance, it is possible to preset the machine for which mode to
start up in, some alarm limits, some functions and options.
This symbol appears at the right hand side of a page when there is more
important information to be read on the following page (there is not
enough room for all assembled information on the same page). Please
continue your reading to obtain the complete information.
In lists, different icons in front of the items show how the lists are
to be used.
1. A numbered list is to be followed from the beginning to the end.
This kind of list mostly appears in handling instructions.
•
In a bullet list not all items may be valid and the items in the list
are not presented in a particular order.
A checkbox list is used when a number of items should be checked
before a procedure is performed.
- In a dashed list all items are valid but are not presented in a
particular order.
Symbols within the User Interface
See chapter 3, "Buttons" starting on page 3:8 in part 1.
1:8 AK 96 ® Operator's Manual - Before you get started
HCEN12239 Revision 12.2010
Program version 3.xx