Gambro AK 96 Operator'S Manual Download Page 15

Page: 15 / 509

Symbols ﬁxed on to the Machine

All symbols in the list below may not be represented on this product.

The symbols can be attached to the machine or attached to the original

packaging.

Symbol

Description

Alternating current

Protective earth (ground)

Warning, consult accompanying

documents

Off (power, disconnection from the

mains)

On (power, connection to the mains)

Type B, applied part

NIBP type BF applied part, de

brillator

proof

Do not stack

Fragile – Handle with care

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Before you get started

1:9

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 15 / 509

Search results

Summary of Contents for AK 96

Reviews: