Gambro AK 96 Operator'S Manual Download Page 115

Page: 115 / 509

Details

Blood Pump

Open the cover of the blood pump by pressing the middle

of the cover at the same time as the cover is being opened.

After this, the blood pump segment can be automatically

or manually threaded.

If the blood pump is automatically threaded, the machine

will thread the blood pump segment over the blood pump

rotor either during function check or when priming is started

dependent on when the pump segment has been placed over

the blood pump rotor.

If it is manually threaded, the operator threads the segment

through the blood pump during the arterial blood line set-up.

Instructions on both alternatives follow after this.

If automatically threaded

Place the blood pump segment over the blood pump rotor

as shown in the corresponding

gure.

While keeping the segment in place, close the blood pump

cover by pressing at the point shown in the corresponding

gure.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Double Needle Treatment

4:19

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 115 / 509

Search results

Summary of Contents for AK 96

Reviews: