Gambro AK 96 Operator'S Manual Download Page 375

Page: 375 / 509

How to ﬁnd the Attention Alarm

The attention alarms in the "Attention Alarm List" are

arranged in alphabetical order.

Each attention alarm description in the "Attention Alarm

List" is divided up into the following sections:

Appears:

Describes what conditions must be present

for an attention alarm to appear, what triggers/generates

an alarm.

Machine actions:

Describes actions that will

automatically be taken by the machine due to the

attention alarm.

Measures:

Describes actions expected from the operator

when an attention alarm appears.

Mutetime:

When the

Mute button

is pressed, the buzzer

sound will be muted during the speci

ed period of time.

Min. = minutes.

Buzzer sound:

Describes which kind of buzzer sound is

used for the attention alarm, see page 14:2.

14:4

AK 96

Operator's Manual - Attention Alarms

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 375 / 509

Search results

Summary of Contents for AK 96

Reviews: