Gambro AK 96 Operator'S Manual Download Page 289

Page: 289 / 509

Menus

The Diascan function have 2 menus displayed on the

Information Display; the Viewing Menu and the Setting

Menu.

Diascan measurement result values are to be read in the

viewing menu, which is displayed by

rst pressing the

Fluid Path button

and then selecting

DIASCAN

using the

Keypad

. In this menu, select

SET DIASCAN

to open

the setting menu.

The Viewing Menu

When Diascan measurements have been performed,

the measurement result values for K and accumulated

Kt are displayed in this menu. A Kt forecast value is

also displayed. If Kt/V measurement is desired, and a

distribution volume has been set, the accumulated Kt and

the Kt forecast value will be replaced by Kt/V values.

Furthermore, if a Kt/V target value has been set, an

estimation of the time needed to reach the target is also

displayed in this menu. It is also possible to view the 20

last measurement results from this menu.

Measurement result values without Kt/V

measurement

LAST DIASCAN

shows

current time

for when the

Diascan measurement check was carried out.

12:8

AK 96

Operator's Manual - Diascan

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 289 / 509

Search results

Summary of Contents for AK 96

Reviews: