Gambro AK 96 Operator'S Manual Download Page 201

Page: 201 / 509

CleanCart cartridge, which leads to a longer time to complete the

program.

The CleanCart-C cartridge can be replaced by liquid citric acid in order

to perform a decalci

cation program; heat disinfection program with

liquid citric acid. The program is performed in a similar way as heat

disinfection program with CleanCart cartridge.

Note

•

In order to enable the cleaning agents to remove fats,

proteins etc. ef

ciently, cleaning should be carried out after

decalci

cation.

Note

For further details concerning the heat disinfection programs; see

"Disinfection and Cleaning - Heat Disinfection" on page 9:9 in part 1.

Handling instructions of above mentioned heat disinfection programs

are described on the following pages in this chapter.

8:10

AK 96

Operator's Manual - Hygiene and Maintenance

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 201 / 509

Search results

Summary of Contents for AK 96

Reviews: