Gambro AK 96 Operator'S Manual Download Page 47

Page: 47 / 509

Parking Port marked P, for Yellow Disinfectant

Connector

The yellow disinfectant connector must be connected to this

yellow port (marked P) at all times except when a chemical

disinfection program is performed. See more information in

point 6 further on in this list.

Disinfection Port for Yellow Disinfectant Connector

The yellow disinfectant connector (point 6 in this list)

is to be connected to this yellow port when a chemical

disinfection program is performed. This is on condition that

the disinfectant used for chemical disinfection program is

permanently connected to the inlet line at the back of the

machine (see "The Rear of the Machine" on page 2:28 in

the next section).

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Machine Description

2:21

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 47 / 509

Search results

Summary of Contents for AK 96

Reviews: