Gambro AK 96 Operator'S Manual Download Page 292

Page: 292 / 509

value (Kt or Kt/V) is adjusted after every successfully

performed measurement check throughout the treatment.

Time To Target

If a target value for Kt/V (

Kt/V TARGET

) has been

set, the machine will show an estimate of the treatment

time needed to reach the desired Kt/V target value.

Time to target will be calculated by the machine and

will automatically be shown as soon as the

rst Diascan

measurement check has been performed. This estimated

time can be compared with the treatment time set but

there will not be an attention alarm generated to make the

operator attentive to any differences.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Diascan

12:11

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 292 / 509

Search results

Summary of Contents for AK 96

Reviews: