Gambro AK 96, Operator'S Manual, Page: 203 / 509

4.a.
Select
CHANGE
.
4.b.
Select
HEAT
.
5. Start the program by pressing the Select key for 3 seconds,
the Rinse/Disinfection button lights up. Note that if the
automatic start of heat disinfection or rinse program has been
activated, the Rinse/Disinfection button will already be lit.
DISINFECTION IN PROGRESS:
will be displayed and will
remain throughout the program.
The Rinse/Disinfection button will continue to be lit throughout
the program, indicating that the program is ongoing.
6. If an automatic switch off is required, press the
On/Off button for 3 seconds.
When the program is complete, drain sequence included, the
Priming button starts to fl ash (not if an automatic switch off has
been done).
7. Switch the machine off by pressing the
On/Off button for
3 seconds.
If a new treatment is to be started directly after the disinfection
program, press the fl ashing Priming button brie fl y and
PRESS SELECT 3 SECONDS TO START FCH
will be
displayed. Press the Select key for 3 seconds to start a new
function check and simultaneously reset previous values to zero.
8:12 AK 96 ® Operator's Manual - Hygiene and Maintenance
HCEN12239 Revision 12.2010
Program version 3.xx