Gambro AK 96 Operator'S Manual Download Page 81

Page: 81 / 509

Blood Pump button

The

Blood Pump button

is used to start and stop the blood pump at the

set blood

ow rate.

Blood Pump Up/Down keys

When pressed, this

Blood Pump Up key

will increase the blood

rate.

When pressed, this

Blood Pump Down key

will decrease the blood

ow rate.

When any of the

Blood Pump Up

Blood Pump Down key

is pressed,

the

BLOOD FLOW MENU

will be displayed on the Information

Display.

The following will be shown on the Information Display:

SET QB

; set blood

ow rate

ACTUAL QB

; current blood

ow rate

VEN PRESS

; current venous pressure

ART PRESS

; current arterial pressure

Keypad

The

Keypad

consists of

Cursor keys

Display Up/Down keys

Select key

and

Back key

Select key

The

Select key

is used to open and close settings of the menus on the

Information Display. The operator is requested to use the

Select key

for

instance when activating/deactivating functions and con

rming

attention alarms.

The

Select key

is also used to go into the positions of the menus; from

the main menus and forwards between the menus of the subsections.

3:20

AK 96

Operator's Manual - Operating the Machine

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 81 / 509

Search results

Summary of Contents for AK 96

Reviews: