Renesas Hitachi H8S/2191, Hardware Manual, Page: 462 / 1065

Rev. 2.0, 11/00, page 435 of 1037
Bit 6: Input Capture Interrupt Enable (ICIE)
When ICIF was set to 1 by the input capture according to the edge of the
,& pin, ICIE enables
and disables the generation of an input capture interrupt.
Bit 6
ICIE Description
0 Disables the generation of an input capture interrupt (Initial value)
1 Enables the generation of an input capture interrupt
Bit 5:
,&
,& Pin Edge Select (ICEG)
ICEG selects the input edge sense of the
,& pin.
Bit 5
ICEG Description
0 Detects the falling edge of the
,&
pin input (Initial value)
1 Detects the rising edge of the
,&
pin input
Bit 4: Noise Cancel ON/OFF (NCon/off)
NCon/off selects enable/disable of the noise cancel function of the
,& pin. For the noise cancel
function, see section 22.3, Noise Cancel Circuit.
Bit 4
NCon/off Description
0 Disables the noise cancel function of the
,&
pin (Initial value)
1 Enables the noise cancel function of the
,&
pin
Bit 3: Reseved Bit
When the bit is read, 1 is always read. The write operation is invalid.