manualshive.com logo in svg

Siemens SINAMICS S Series, Список руководств

Поделиться
Скачать
Siemens SINAMICS S Series Скачать руководство пользователя страница 83

List of parameters

Parameters

1-83

© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007

The units of all motor parameters are changed that are involved in the selection of IEC or NEMA (e.g. r0206, p0307, 
p0316, r0333, r0334, p0341, p0344, r1493, r1969).

Refer to: r0206, p0210, p0300, p0304, p0305, p0307, p0308, p0309, p0310, p0311, p0312, p0314, p0320, p0322, 
p0323, p0335, r0336, r0337, p0338, p1800

Note:

The parameter can only be changed for vector control (p0107).

The parameter value is not reset when the factory setting is restored (p0010 = 30, p0970).

Description:

The parameter contains the object number via which every drive object can be addressed.

The number of an existing drive object is entered into each index.

The numbers are automatically assigned once and cannot longer be changed as long as the object has not been 
deleted.

In the commissioning software, this object number cannot be entered using the Expert list, but is automatically 
assigned when inserting an object.

Index:

[0] = Drive object number, Control Unit
[1] = Drive object number, object 1
[2] = Drive object number, object 2
[3] = Drive object number, object 3
[4] = Drive object number, object 4
[5] = Drive object number, object 5
[6] = Drive object number, object 6
[7] = Drive object number, object 7
[8] = Drive object number, object 8
[9] = Drive object number, object 9
[10] = Drive object number, object 10
[11] = Drive object number, object 11
[12] = Drive object number, object 12
[13] = Drive object number, object 13
[14] = Drive object number, object 14
[15] = Drive object number, object 15

Note:

Value = 0: No drive object is defined.

Description:

Displays the number of existing or existing and prepared drive objects.

Index:

[0] = Existing drive objects
[1] = Existing and prepared drive objects

Dependency:

Refer to: p0101

Note:

The numbers of the drive objects are in p0101.

Index 0:

Displays the number of drive objects that have already been set-up.

Index 1:

Displays the number of drive objects that have already been set-up and, in addition, the drive objects that still have 
to be set-up.

p0101[0...15]

Drive object numbers / DO numbers

CU_CX32, CU_S

Can be changed:

 C1(1)

Calculated: 

-

Access level: 

2

Data type: 

Unsigned16

Dynamic index: 

-

Func. diagram: 

-

P-Group: 

Topology

Units group: 

-

Unit selection: 

-

Not for motor type: 

-

Expert list: 

1

Min Max 

Factory 

setting 

0 62 

0 

r0102[0...1]

Number of drive objects / DO count

CU_CX32, CU_S

Can be changed:

 -

Calculated: 

-

Access level: 

2

Data type: 

Unsigned16

Dynamic index: 

-

Func. diagram: 

-

P-Group: 

Topology

Units group: 

-

Unit selection: 

-

Not for motor type: 

-

Expert list: 

1

Min Max 

Factory 

setting 

- - 

- 

Содержание SINAMICS S Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды