manualshive.com logo in svg

Siemens SINAMICS S Series, Список руководств

Поделиться
Скачать
Siemens SINAMICS S Series Скачать руководство пользователя страница 821

List of parameters

Parameters

1-821

© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007

Description:

Sets the sampling time for the inputs and outputs of the Terminal Board 30 (TB30).

Index:

[0] = Digital inputs/outputs (DI/DO)
[1] = Analog inputs (AI)
[2] = Analog outputs (AO)

Dependency:

The parameter can only be modified for p0009 = 3, 29.

The sampling times can only be set as an integer multiple of the basic sampling time (r0110, r0111).

Refer to: p0009, r0110, r0111

Note:

The modified sampling time is not effective until the drive unit is powered-up again.

For clock cycle synchronous PROFIBUS operation, the TB30 hardware (e.g. A/D converter ) is operated with the 
PROFIBUS clock cycle (r2064[1]). This clock cycle is also kept after the PROFIBUS connection has been exited up 
to the next time that the Control Unit is powered-down. In this case, a faster sampling time than the PROFIBUS 
clock cycle is not practical in p4099[0...2].

Description:

Sets the sampling time for the inputs and outputs of terminal module 31 (TM31).

Index:

[0] = Digital inputs/outputs (DI/DO)
[1] = Analog inputs (AI)
[2] = Analog outputs (AO)

Dependency:

The parameter can only be modified for p0009 = 3, 29.

The sampling times can only be set as an integer multiple of the basic sampling time (r0110, r0111).

Refer to: p0009, r0110, r0111

Notice:

The sampling times entered in index 0 (digital inputs/outputs) and index 2 (analog outputs) must always be greater 
than or equal to the sampling time in index 1 (analog inputs).

Note:

- the modified sampling time is not effective until the drive unit is powered-up again.

- P4099(0) must never equal zero.

p4099[0...2]

TB30 inputs/outputs, sampling time / TB30 I/O t_sample

TB30

Can be changed:

 C1(3)

Calculated: 

-

Access level: 

3

Data type: 

Floating Point

Dynamic index: 

-

Func. diagram: 

9100, 9102, 

9104, 9106

P-Group: 

Commands

Units group: 

-

Unit selection: 

-

Not for motor type: 

-

Expert list: 

1

Min Max 

Factory 

setting 

0.00 [µs]

5000.00 [µs]

[0] 4000.00 [µs]

[1] 4000.00 [µs]

[2] 4000.00 [µs]

p4099[0...2]

TM31 inputs/outputs, sampling time / TM31 I/O t_sample

TM31

Can be changed:

 C1(3)

Calculated: 

-

Access level: 

3

Data type: 

Floating Point

Dynamic index: 

-

Func. diagram: 

9550

P-Group: 

Commands

Units group: 

-

Unit selection: 

-

Not for motor type: 

-

Expert list: 

1

Min Max 

Factory 

setting 

0.00 [µs]

5000.00 [µs]

4000.00 [µs]

Содержание SINAMICS S Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды