manualshive.com logo in svg

Siemens SINAMICS S Series, Список руководств

Поделиться
Скачать
Siemens SINAMICS S Series Скачать руководство пользователя страница 1463

List of faults and alarms

Faults and Alarms

3-1463

© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007

A01388

Topology: Comparison EnDat encoder shifted

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The topology comparison has detected an EnDat encoder in the actual topology that has been shifted with respect 
to the target topology.
Alarm value (r2124, interpret hexadecimal):
Byte 1: Component number of the component shifted in the target topology
The connection in the actual topology where the shifted component was detected, is described in bytes 2, 3 and 4.
Byte 2: Component class
Byte 3: Component number
Byte 4: Connection number
Note:
Component class and connection number are described in F01375.
The drive system is no longer booted. In this state, the drive control (closed-loop) cannot be enabled.

Remedy:

Adapting the topologies:
- undo the change to the actual topology by changing-over the DRIVE-CLiQ cables.
- commissioning software: Go online, upload the drive unit, adapt the topology offline and download the modified 
project.
- automatically remove the topology error (p9904).
Note:
Under "Topology --> Topology view" the commissioning software offers improved diagnostics capability (e.g. set-
point/actual value comparison).

A01389

Topology: Comparison motor with DRIVE-CLiQ shifted

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The topology comparison has detected a motor with DRIVE-CLiQ in the actual topology that has been shifted with 
respect to the target topology.
Alarm value (r2124, interpret hexadecimal):
Byte 1: Component number of the component shifted in the target topology
The connection in the actual topology where the shifted component was detected, is described in bytes 2, 3 and 4.
Byte 2: Component class
Byte 3: Component number
Byte 4: Connection number
Note:
Component class and connection number are described in F01375.
The drive system is no longer booted. In this state, the drive control (closed-loop) cannot be enabled.

Remedy:

Adapting the topologies:
- undo the change to the actual topology by changing-over the DRIVE-CLiQ cables.
- commissioning software: Go online, upload the drive unit, adapt the topology offline and download the modified 
project.
- automatically remove the topology error (p9904).
Note:
Under "Topology --> Topology view" the commissioning software offers improved diagnostics capability (e.g. set-
point/actual value comparison).

Содержание SINAMICS S Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды