Siemens SINAMICS S Series Скачать руководство пользователя страница 42

Страница: 42 / 1816

Parameters

List of parameters

1-42

SINAMICS S List Manual (LH1), 07/2007

Description:

Acknowledges the password for the Basic Operator Panel (BOP).

Dependency:

Refer to: p0011, p0013

Description:

Sets the required parameters to read and write via the Basic Operator Panel (BOP).

Activation:

1. p0003 = 3 (expert).

2. p0013[0...49] = requested parameter number

3. If required, enter p0011 = password in order to prevent non-authorized de-activation.

4. p0003 = 0 --> activates the selected user-defined list.

De-activation/change:

1. p0003 = 3 (expert).

2. If required, p0012 = p0011, in order to be authorized to change or de-activate the list.

3. If required p0013[0...49] = required parameter number.

4. p0003 = 0 --> activates the modified user-defined list.

5. p0003 > 0 --> de-activates the user-defined list.

Dependency:

Refer to: p0009, p0011, p0012, p0976

Note:

The following parameters can be read and written on the Control Unit drive object:

- p0003 (access stage)

- p0009 (device commissioning, parameter filter)

- p0012 (BOP password acknowledgement (p0013))

The following applies for the user-defined list:

- password protection is only available on the drive object Control Unit and is valid for all of the drive objects.

- p0013 cannot be included in the user-defined list for all drive objects.

- p0003, p0009, p0011, p0012, p0976 cannot, for the drive object Control Unit, be included in the user-defined list.

- the user-defined list can be cleared and de-activated "restore factory setting".

A value of 0 means: Entry is empty.

p0012

BOP password acknowledgement (p0013) / BOP passw ackn p13

CU_S

Can be changed:

U, T

Calculated:

Access level:

Data type:

Unsigned16

Dynamic index:

Func. diagram:

P-Group:

Functions

Units group:

Unit selection:

Not for motor type:

Expert list:

Min Max

Factory

setting

0 65535

p0013[0...49]

BOP user-defined list / BOP list

A_INF, B_INF,
CU_S, DMC20,
SERVO, S_INF,
TB30, TM15,
TM15DI_DO, TM17,
TM31, TM41,
TM54F_MA,
TM54F_SL, VEC-
TOR

Can be changed:

U, T

Calculated:

Access level:

Data type:

Unsigned16

Dynamic index:

Func. diagram:

P-Group:

Functions

Units group:

Unit selection:

Not for motor type:

Expert list:

Min Max

Factory

setting

0 65535

Содержание SINAMICS S Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINAMICS S Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SINAMICS S Series, Список руководств

Результаты поиска

Содержание SINAMICS S Series

Отзывы:

Бренды по названию

Популярные бренды