manualshive.com logo in svg

Siemens SINAMICS S Series, Список руководств

Поделиться
Скачать
Siemens SINAMICS S Series Скачать руководство пользователя страница 1504

Faults and Alarms

List of faults and alarms

3-1504

© Siemens AG 2007 All Rights Reserved

SINAMICS S List Manual (LH1), 07/2007

Remedy:

Use a SERVO / VECTOR drive object with the corresponding number.
Note:
The alarm is reset as follows:
- remove the cause of this alarm.
- restart the function generator.

A02008

Function generator: Drive specified a multiple number of times

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The drive object specified for connection is already specified.
Alarm value (r2124, interpret decimal):
Drive object number of the drive object that is specified a multiple number of times.

Remedy:

Specify a different drive object.
Note:
The alarm is reset as follows:
- remove the cause of this alarm.
- restart the function generator.

A02009

Function generator: Illegal mode

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The selected operating mode (p1300) of the drive object is not permissible when using the function generator.
Alarm value (r2124, interpret decimal):
Number of the drive object involved.

Remedy:

Change the operating mode for this drive object to p1300 = 20 (sensorless speed control) or p1300 = 21 (speed con-
trol with encoder).
Note:
The alarm is reset as follows:
- remove the cause of this alarm.
- restart the function generator.

A02010

Function generator: Speed setpoint from the drive is not zero

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The speed setpoint of a drive - selected to be connected to - is greater than the value for the standstill detection set 
using p1226.
Alarm value (r2124, interpret decimal):
Number of the drive object involved.

Remedy:

For all of the drives specified for connection, set the speed setpoints to 0.
Note:
The alarm is reset as follows:
- remove the cause of this alarm.
- restart the function generator.

A02011

Function generator: The actual drive speed is not zero

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The speed actual value of a drive - selected to be connected to - is greater than the value for the standstill detection 
set using p1226.
Alarm value (r2124, interpret decimal):
Number of the drive object involved.

Содержание SINAMICS S Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды