NXP Semiconductors PXN2020, Reference Manual, Page: 666 / 1376

FlexRay Communication Controller (FlexRAY)
PXN20 Microcontroller Reference Manual, Rev. 1
26-52 Freescale Semiconductor
Table 26-53. SSCCR Field Descriptions
Field Description
WMD Write Mode — This control bit defines the write mode of this register.
0 Write to all fields in this register on write access.
1 Write to SEL field only on write access.
SEL Selector — This field selects one of the four internal slot counter condition registers for access.
00 Select SSCCR0.
01 Select SSCCR1.
10 Select SSCCR2.
11 Select SSCCR3.
CNTCFG Counter Configuration — These bit field controls the channel related incrementing of the slot status counter.
00 Increment by 1 if condition is fulfilled on channel A.
01 Increment by 1 if condition is fulfilled on channel B.
10 Increment by 1 if condition is fulfilled on at least one channel.
11 Increment by 2 if condition is fulfilled on both channels. Increment by 1 if condition is fulfilled on only one
channel.
MCY Multi Cycle Selection — This bit defines whether the slot status counter accumulates over multiple
communication cycles or provides information for the previous communication cycle only.
0 The Slot Status Counter provides information for the previous communication cycle only.
1 The Slot Status Counter accumulates over multiple communication cycles.
VFR Valid Frame Restriction — This bit is used to restrict the counter to received valid frames.
0 The counter is not restricted to valid frames only.
1 The counter is restricted to valid frames only.
SYF Sync Frame Restriction — This bit is used to restrict the counter to received frames with the sync frame
indicator bit set to 1.
0 The counter is not restricted with respect to the sync frame indicator bit.
1 The counter is restricted to frames with the sync frame indicator bit set to 1.
NUF Null Frame Restriction — This bit is used to restrict the counter to received frames with the null frame
indicator bit set to 0.
0 The counter is not restricted with respect to the null frame indicator bit.
1 The counter is restricted to frames with the null frame indicator bit set to 0.
SUF Startup Frame Restriction — This bit is used to restrict the counter to received frames with the startup frame
indicator bit set to 1.
0 The counter is not restricted with respect to the startup frame indicator bit.
1 The counter is restricted to received frames with the startup frame indicator bit set to 1.
STATUS
MASK[3:0]
Slot Status Mask — This bit field is used to enable the counter with respect to the four slot status error
indicator bits.
STATUSMASK[3] – This bit enables the counting for slots with the syntax error indicator bit set to 1.
STATUSMASK[2] – This bit enables the counting for slots with the content error indicator bit set to 1.
STATUSMASK[1] – This bit enables the counting for slots with the boundary violation indicator bit set to 1.
STATUSMASK[0] – This bit enables the counting for slots with the transmission conflict indicator bit set to 1.
Table 26-54. Mapping between internal SSCCRn and SSCRn
Condition Register Condition Defined for Register
SSCCR0 SSCR0
SSCCR1 SSCR1
SSCCR2 SSCR2
SSCCR3 SSCR3