NXP Semiconductors PXN2020, Reference Manual, Page: 1001 / 1376

Enhanced Serial Communication Interface (eSCI)
PXN20 Microcontroller Reference Manual, Rev. 1
Freescale Semiconductor 31-11
31.3.2.5 eSCI Interrupt Flag and Status Register 1 (eSCI_IFSR1)
This register provides interrupt flags that indicate the occurrence of module events. The related interrupt
enable bits are located in Control Register 1 (eSCI_CR1) and Control Register 2 (eSCI_CR2).
Table 31-6. eSCI_DR Field Descriptions
Field Description
RN Received Most Significant Bit. The semantic of this bit depends on the frame format selected by eSCI_CR3[M2],
eSCI_CR1[M], and eSCI_CR1[PE].
[M2 = 0,M = 1,PE = 0]: value of received data bit 8 or address bit.
[M2 = 0,M = 1,PE = 1]: value of received parity bit if eSCI_CR2[PMSK] = 0, 0 otherwise.
[M2 = 1,M = 0,PE = 1]: value of received parity bit if eSCI_CR2[PMSK] = 0, 0 otherwise.
[M2 = 1,M = 1,PE = 1]: value of received parity bit if eSCI_CR2[PMSK] = 0, 0 otherwise.
It is 0 for all other frame formats.
TN Transmit Most Significant Bit. The semantic of this bit depends on the frame format selected by eSCI_CR3[M2],
eSCI_CR1[M], and eSCI_CR1[PE].
[M2 = 0,M = 1,PE = 0]: value to be transmitted as data bit 8 or address bit.
It is not used for all other frame formats.
ERR Receive Error Bit. This bit indicates the occurrence of the errors selected by the Control Register 3 (eSCI_CR3)
during the reception of the frame presented in SCI Data Register (eSCI_SDR). In case of an overrun error for
subsequent frames this bit is set too.
0 None of the selected errors occured.
1 At least one of the selected errors occured.
RD[11:8] Received Data. The semantic of this field depends on the frame format selected by eSCI_CR3[M2] and
eSCI_CR1[M].
[M2 = 1,M = 1]: value of the received data bits 11:8. (Rn = BITn).
It is all 0 for all other frame formats.
RD7 Received Bit 7. The semantic of this bit depends on the format selected by eSCI_CR3[M2], eSCI_CR1[M], and
eSCI_CR1[PE].
[M2 = 0,M = 0,PE = 0]: value of received bit 7 or ADDR bit.
[M2 = 0,M = 0,PE = 1]: value of received parity bit if eSCI_CR2[PMSK] = 0, 0 otherwise.
For all other frame formats it is the value of received bit 7.
TD7 Transmit Bit 7. The semantic of this bit depends on the format selected by eSCI_CR3[M2], eSCI_CR1[M], and
eSCI_CR1[PE].
[M2 = 0,M = 0,PE = 0]: value of transmit bit 7 or ADDR bit.
[M2 = 0,M = 0,PE = 1]: not used. Parity bit is generated internally before transmission.
For all other frame formats it is the value of transmit bit 7.
RD[6:0] Received bits 6 to 0. Value of received BITn is shown in bit RDn
TD[6:0] Transmit bits 6 to 0. Value of bit TDn is transmitted in BITn.
Offset: ESC 0x0008 Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R TDRE TC RDRF IDLE OR NF FE PF 0 0 0 BERR 0 0 TACT RACT
W w1c w1c w1c w1c w1c w1c w1c w1c w1c
Reset 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Figure 31-6. eSCI Interrupt Flag and Status Register 1 (eSCI_IFSR1)