NXP Semiconductors K32 L2A Series, Reference Manual, Page: 679 / 1379

LLWU_ME field descriptions (continued)
Field Description
0 Internal module flag not used as wakeup source
1 Internal module flag used as wakeup source
1
WUME1
Wakeup Module Enable for Module 1
Enables an internal module as a wakeup source input.
0 Internal module flag not used as wakeup source
1 Internal module flag used as wakeup source
0
WUME0
Wakeup Module Enable For Module 0
Enables an internal module as a wakeup source input.
0 Internal module flag not used as wakeup source
1 Internal module flag used as wakeup source
26.3.6 LLWU Module DMA Enable register (LLWU_DE)
LLWU_DE contains the bits to enable an internal module DMA request as a wakeup
source for inputs LLWU_M7DR - LLWU_M0DR .
NOTE
This register is reset on Chip Reset not VLLS and by reset
types that trigger Chip Reset not VLLS. It is unaffected by reset
types that do not trigger Chip Reset not VLLS. See the
Introduction details for more information.
Address: 4006_1000h base + 1Ch offset = 4006_101Ch
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
WUDE7 WUDE6 WUDE5 WUDE4 WUDE3 WUDE2 WUDE1 WUDE0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Chapter 26 Low-Leakage Wakeup Unit (LLWU)
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 679