NXP Semiconductors K32 L2A Series, Reference Manual, Page: 544 / 1379

22.2.1.8.4 Fields
Field Function
31-8
—
7-0
TSF
Timer Status Flags
The timer status flag sets depending on the timer mode, and can be cleared by writing logic one to the
flag.
In 8-bit counter mode, the timer status flag is set when the upper 8-bit counter equals zero and
decrements, this also causes the counter to reload with the value in the compare register.
In 8-bit PWM mode, the timer status flag is set when the upper 8-bit counter equals zero and decrements,
this also causes the counter to reload with the value in the compare register..
In 16-bit counter mode, the timer status flag is set when the 16-bit counter equals zero and decrements,
this also causes the counter to reload with the value in the compare register..
00000000b - Timer Status Flag is clear
00000001b - Timer Status Flag is set
22.2.1.9 Shifter Status Interrupt Enable (SHIFTSIEN)
22.2.1.9.1 Address
Register Offset
SHIFTSIEN 400CA020h
22.2.1.9.2 Function
.
22.2.1.9.3 Diagram
Bits 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R 0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R 0
SSIE
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Memory Map and Registers
K32 L2A Reference Manual, Rev. 2, 01/2020
544 NXP Semiconductors