NXP Semiconductors K32 L2A Series, Reference Manual, Page: 1027 / 1379

Address: 4007_F000h base + 1Ch offset = 4007_F01Ch
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0 0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 0
SACKERR
0
MDM_AP
SW
LOCKUP
0
GIE PIN
WDOG
0
LOL LOC DELAY
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RCM_SRIE field descriptions
Field Description
31–17
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
16
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
15
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
14
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
13
SACKERR
Stop Acknowledge Error Interrupt
0 Interrupt disabled.
1 Interrupt enabled.
12
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
11
MDM_AP
MDM-AP System Reset Request
0 Interrupt disabled.
1 Interrupt enabled.
10
SW
Software Interrupt
0 Interrupt disabled.
1 Interrupt enabled.
9
LOCKUP
Core Lockup Interrupt
NOTE: The LOCKUP bit is useful only in devices with more than one core processor.
0 Interrupt disabled.
1 Interrupt enabled.
8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
7
GIE
Global Interrupt Enable
Table continues on the next page...
Chapter 39 Reset Control Module (RCM)
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 1027