NXP Semiconductors K32 L2A Series, Reference Manual, Page: 1013 / 1379

Chapter 39
Reset Control Module (RCM)
39.1 Introduction
Information found here describes the registers of the Reset Control Module (RCM). The
RCM implements many of the reset functions for the chip. See the chip's reset chapter for
more information.
See AN4503: Power Management for Kinetis and C MCUs for further details on
using the RCM.
39.2 Reset memory map and register descriptions
The RCM Memory Map/Register Definition can be found here.
The Reset Control Module (RCM) registers provide reset status information and reset
filter control.
NOTE
The RCM registers can be written only in supervisor mode.
Write accesses in user mode are blocked and will result in a bus
error.
RCM memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
4007_F000 Version ID Register (RCM_VERID) 32 R 0300_0003h 39.2.1/1014
4007_F004 Parameter Register (RCM_PARAM) 32 R See section 39.2.2/1015
4007_F008 System Reset Status Register (RCM_SRS) 32 R 0000_0082h 39.2.3/1017
4007_F00C Reset Pin Control register (RCM_RPC) 32 R/W 0000_0000h 39.2.4/1020
Table continues on the next page...
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 1013